|| Mouse Over image to Zoom in.
Click image to see complete image.
HYDRAULIC CAMSHAFT PERFORMER RPM 70/74 351C
Edelbrock Performer RPM Hydraulic Flat Tappet Cam for 351C.
Includes cam, lifters & assembly lube. Dyno-matched to Performer RPM manifold & heads for high rpm hp while maintaining acceptable low-end torque & 10 to 12" vacuum at idle.
-RPM Range: 1,500-6,500
-Duration Adv: 312/322 Int/Exh
-Duration @ .050": 234/244 Int/Exh
-Lift: .562"/.588" Int/Exh
-Lobe Separation: 112 degrees
-Timing Set, #EDL7821
*Requires screw-in studs, adjustable rockers & valve springs w/ 120 lbs seated pressure, 300 lbs open pressure @ .500" lift & can handle .588" lift.
Item No: EDL7168 01
In Stock Now!
This item qualifies for
Email product information to a friend.
FREE Ground Shipping
(Applies to lower
48 US States only)