|| Mouse Over image to Zoom in.
Click image to see complete image.
BELL HOUSING SPACER PLATE ADAPTER 65/70 T-5 CONV
Bellhousing Adapter Plate for 1965-1970 Mustang with late-model T-5 Conversion.
Fits 1965-1970 6-bolt bell housings. Adapts early bell housing to T-5 tranny. The input shaft on a newer T-5 tranny is 5/8" longer than the original tranny's input shaft, so a spacer or adapeter is needed if you plan to use early model bell housing. Includes instructions & hardware.
-Transmission Crossmember, 1965-1966, #T5CM1
-Transmission Crossmember, 1967-1970, #T5CM2
*Requires drilling (15/32") & tapping (7/16"-14) of 4 holes in the bellhousing. Driveshat modification are necessary.
|Our Low Price:
In Stock Now!
This item qualifies for
Email product information to a friend.
FREE Ground Shipping
(Applies to lower
48 US States only)